Abstract
Copoly(phthalazinone biphenyl ether sulfone) (PPBES) with excellent performance is utilized to fabricate the substrate membrane of the composite nanofiltration (NF) membrane and the functional layer of the NF membrane is prepared by the interfacial polymerization from piperazine (PIP) and trimesoyl chloride (TMC). The performances of the substrate ultrafiltration (UF) membrane such as molecular weight cut-off (MWCO) and hydrophilicity are also studied to improve the composite membrane performance. When the composite membrane is prepared under optimized conditions and tested at 1.0 MPa and 20 °C, the flux of the composite NF membrane is about 77 L/m 2 h and the Na 2SO 4 rejection of it is about 97.5%. The surface morphologies of the composite membrane and substrate membrane are observed by scanning electron microscopy (SEM). The flux is increased from 61 to 290 L/m 2 h with the rejection of the membrane decreases 3.8% when the operation temperature increases from 18 °C to 85 °C at 1.0 MPa.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
