Abstract
Epoxy-polyamide coatings are used to protect metallic substrates in corrosive atmosphere. Thermal stability of the coating can be improved by the addition of inorganic cross-linking agent. Epoxy resin is incorporated with small percentage of silicone resin and cured with two types of hardeners such as polyamide and butyl titanate. The physical properties, heat resistance properties and electrochemical impedance behaviour of these coatings on steel in 0.5 M NaCl solution have been studied. The result implies that the heat resistant character of the titanate-cured coating is increased from 260 to 370 °C. The impedance study has shown that the coating resistance exerted by both the systems is in the range of 10 5 Ω cm 2 after 6 days of immersion in 0.5 M NaCl. FTIR and Raman spectroscopy analysis confirm the presence of titanate linkage in the cured polymer coating. Thermal stability data indicate that the epoxy silicone resin cured with titanate hardener possesses higher thermal stability than that cured by polyamide hardener.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
