Abstract
The simplest peroxide, hydrogen peroxide (H2O2) was used to prepare the surface modified poly(p-phenylene terephthalaramide) (PPTA) fibers under the assistant of ultrasonic vibration. Fourier transform infrared spectroscopy (FTIR) spectra indicated the increase of the active polar groups on the surface of the fibers. X-ray photoelectron spectroscopy (XPS) analysis confirmed that more carboxyl groups and hydroxyl groups have been obtained after this treatment. Scanning electron microscope (SEM) showed that the surface roughness of the fibers has been improved accordingly. The interfacial properties of modified PPTA fiber/epoxy composites were investigated by the single fiber pull-out test (SFP). The results showed that the interfacial shear strength (IFSS) of PPTA/epoxy composites was remarkably improved by 42.14 % while the breaking strength was not affected appreciably. The modified fiber presented 26.9 % higher moisture regain compared with the original fiber. It proved to be an efficient method to make the surface modified PPTA fiber for the application of the advanced composites at a relatively low cost.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
