Abstract
The double-layer membrane consisting of sulfonated poly(ether sulfone) (SPES) sub-layer and polyvinyl alcohol (PVA) sub-layer (denoted as SPES/PVA membrane) was prepared and employed as the separator for vanadium redox flow battery (VRB) system to evaluate the vanadium ions permeability and cell performance. The SPES/PVA membrane is a double-layer structure and exhibits dramatically lower vanadium ions permeability and better cell performance compared to the pristine SPES membrane, PVA membrane, and Nafion117 membrane. The vanadium ion permeability of SPES/PVA membrane is one order of magnitude lower than that of Nafion117 membrane. In further work, the single cell with SPES/PVA membrane showed significantly lower capacity loss, higher coulombic efficiency (>92.5%), and higher energy efficiency (>83.9%) than Nafion117 membrane. In the self-discharge test, SPES/PVA membrane showed 1.8 times longer duration in the open circuit decay than Nafion117 membrane. With all the good properties and low cost, this new kind of double-layer membrane is suggested to have excellent commercial prospects as an ion exchange membrane for VRB systems.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
