Preparation and characterization of RDX based composite energetic materials with a cellulose matrix

Abstract

AbstractCyclotrimethylenetrinitramine (RDX)‐based high‐energy explosives are widely used in weapon warheads, propellants, and ammunition. Many studies have explored different supporting structures for RDX; however, the use of natural materials have rarely has been reported. Natural cellulose is widely known for its excellent compatibility and loading capacity. In this study, cellulose was used as a supporting structure and insensitive material for RDX composites. Cellulose/RDX composite aerogels (RCAs) were prepared using 1‐allyl‐3‐methyl imidazole (AMIMCl) as the solvent, and their properties were characterized. The results show that the content of nitrogen in cellulose/RCAs was 34.5%, and the content of RDX was as high as 94.3%. Moreover, RDX particles were attached to the fibers inside the cellulose aerogels (CAs), forming a homogeneous protective layer on the surface of the cellulose matrix. Compared with the raw RDX material, the thermal stability of the cellulose/RDX energetic aerogels was greatly increased. The porosity of the CAs was reduced due to RDX particles growing inside the CAs. The impact sensitivity increased from 35 to 78 cm.