Abstract
ABSTRACTPolyimides (PI) have been studied as the basic materials for preparing gas separation membranes attributable to their high gas selectivity. This paper deals with the preparation and characterization of blended polyimide membranes with polyethersulfone (PES) to study separation of ethylene from nitrogen gas at different feed pressures. For improving performance of PI membranes, two procedures were used. First, using polymeric additives such as polyvinylidene fluoride (PVDF) and PES in low content and second, blending of PI casting solution with high amount of PES. Infrared spectroscopy and scanning electron microscopy (SEM) images were employed to characterize the membranes. Pyromellitic dianhydride‐co‐4, 4′‐oxy dianiline (PMDA/ODA) polyimide membranes was synthesized using polyamic acid (PAA) as precursor materials. The ideal selectivity of 100% (ethylene permeation only) was achieved at 1 bar using PMDA/ODA polyimide membranes containing 1 wt% PVDF. Addition of PES did not have any significant influence on ideal selectivity of the prepared membranes. PES‐(PMDA/ODA) polyamic acid blend membranes were prepared using different blending ratios of PES (25 wt%) and PAA (15 wt%). The blending ratio of casting solutions of PES/PAA solutions exhibited a main influence on the ideal selectivity. The ideal selectivity of 2.9 for ethylene was achieved at 3 bar using blend membranes with 0.5 wt% PAA solution. PES‐PMDA/ODA polyimide membranes were also prepared from blend casting solutions by thermal imidization. Immiscible blend membranes were obtained at different blending ratios of the casting solutions with high gas permeance and poor selectivity. © 2011 Curtin University of Technology and John Wiley & Sons, Ltd.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.