Preparation and characterization of phase change material microcapsules with modified halloysite nanotube for controlling temperature in the building

Abstract

Microencapsulated phase change material (mPCM) with effective heat transfer and flame retardant is highly desirable given today’s increasing energy demand. In this article, the halloysite nanotube (D-HNT) was modified by 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and then inserted into the mPCM (D-H-mPCM) successfully. The transmission electron microscope, X-ray photoelectron spectroscopy and FT-IR results showed that the DOPO is grafted in both interior and exterior walls of halloysite nanotube (HNT), and the D-HNT is successfully inserted into mPCM. According to thermogravimetric analysis tests, D-H-mPCM was the best thermally stable sample among other mPCM for the existence of HNT and DOPO. The differential scanning calorimetry tests showed that the latent heat of D-H-mPCM was 113.52 J/g, and the D-HNT embedded in the mPCM greatly contributes to the heat transfer of the PMMA shell. To detect the flame retardancy and temperature control performance of mPCM samples, D-H-mPCM was incorporated into epoxy resin (EP-D-H-mPCM). The data of the cone calorimeter test suggested the EP-D-H-mPCM exhibited the lowest peak of heat release rate (pHRR) and total heat release (THR) of 572.65 kW/m2 and 93.95 MJ/m2 respectively. Finally, the small room model test and infrared thermal imager test showed the application of D-H-mPCM in EP can regulate indoor temperature and moderate temperature fluctuation. This work provides a new methodology to improve both thermal conductivity and flame retardancy of mPCM.