Abstract
PDMS-PVDF hydrophobic microporous membranes were prepared through NIPS process for the vacuum membrane distillation (VMD). The influences of PDMS/PVDF mass ratio on the morphology, crystalline structure, pore structure, hydrophobicity, mechanical characteristics and permeability of the membranes were investigated. Compared with the finger-like pore PVDF membrane, PDMS-PVDF membrane had two kinds of pores which are finger-like pore and sponge-like pore and had higher porosity, bigger mean pore size, higher hydrophobicity, stronger mechanical properties and better VMD performances. The VMD experiment for a 20g/L NaCl aqueous was carried out at feed temperature 50°C and permeate-side vacuum 80kPa. Compared with PVDF membrane, PDMS-PVDF blend membrane exhibited striking advantages in permeation performances, and when PDMS/PVDF mass ratio was 1:5, the maximum permeate flux was 15.23kg/(m2·h), which was equal or even better than most results of the other studies.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
