Abstract
Pd-loaded K2NiF4-type perovskite oxides, Pd/La0.2Sr1.8−xMnO4 were prepared by liquid-phase adsorption process, and their structural and catalytic properties were investigated. Pd deposition was carried out by mixing La0.2Sr1.8MnO4 with Pd(NO3)2 in aqueous solution, followed by filtration, drying, and calcination at 800°C. During the Pd deposition process, 5% of Sr in La0.2Sr1.8MnO4 oxides was dissolved into the aqueous phase, whereas the perovskite structure retained. The content of Pd loaded on La0.2Sr1.8MnO4 was 0.24wt%. X-ray absorption spectroscopy studies showed that highly dispersed PdO nanoparticles were supported on Pd/La0.2Sr1.8MnO4 prepared by the liquid-phase adsorption process, whereas aggregated PdO particles were formed on Pd/La0.2Sr1.8MnO4 prepared by an impregnation method. The Pd/La0.2Sr1.8MnO4 catalyst prepared by the liquid-phase adsorption process exhibited higher catalytic activity for NO–CO reaction than the 0.24wt% Pd/La0.2Sr1.8MnO4 catalyst prepared by the impregnation method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
