Preparation and characterization of P(AN‐co‐VA‐co‐DEMA) fibers coated with multiwalled carbon nanotubes by electrostatic interactions

Abstract

ABSTRACTP(AN‐co‐VA‐co‐DEMA) terpolymers were synthesized by aqueous precipitation copolymerization of acrylonitrile (AN), vinyl acetate (VA), and 2‐dimethylamino ethyl methacrylate (DEMA) with an Na2S2O5–NaClO3 redox initiating system and fibers from these terpolymers were thus prepared by a wet spinning method. Functionalized multiwalled carbon nanotube (F‐MWNT) networks were created on the surface of P(AN‐co‐VA‐co‐DEMA) fibers by a simple dipping method. The morphology and interfacial interactions of the obtained F‐MWNTs‐coated fibers were characterized by scanning electron microscope, Raman spectroscopy, and Fourier transform infrared spectroscopy. The results showed that F‐MWNTs were assembled on the fibers and the density of F‐MWNTs can be controlled by adjusting the F‐MWNTs content in the dipping solution. The assembly process was driven by electrostatic interactions between the negative charges on the nanotube sidewalls and the positive charges of the fibers. The F‐MWNTs‐coated fibers had a good conductivity. The volume resistivity of the fibers coated with 1.18 wt % F‐MWNTs reached 0.27 Ω·cm, while the original mechanical properties were preserved. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42545.