Abstract
An approach to produce molybdenum trioxide from spent hydrodesulfurization (HDS) catalyst, obtained from a petroleum refinery, is presented here. The spent catalyst was devolatilized at 600 °C so as to make it free from oils, organics and other volatile species. It was then roasted with sodium carbonate at a temperature of 850 °C for 30 min. The leaching efficiency for 20% soda roasted sample at 10% pulp density was 99.8%. From the solution molybdenum was precipitated out as ammonium molybdate at pH 1.0 with HCl and ammonium chloride. This ammonium molybdate was calcined at 750 °C to get MoO3. The product was characterized by XRD. Its purity was determined titrimetrically and by ICP-AES.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
