Abstract
In this work, lignin polyols were prepared from the liquefaction of kraft lignin and from the direct liquefaction of Elaeis guineensis lignocellulosic waste. The liquefaction reaction was performed with polyhydric alcohols using sulfuric acid as catalyst at 160 °C. The physical and chemical characterizations of lignin and lignin polyols were conducted by elemental analysis, Fourier transform-infrared spectroscopy, 1H and 13C nuclear magnetic resonance (NMR) spectroscopy, molecular weight distribution, and thermogravimetric analysis (TGA). Quantitative 13C NMR showed that all aliphatic hydroxyl group values of polyols noticeably increased with the use of the two methods compared to kraft lignin. The average molecular weight analysis of the liquefied product showed that it exhibited high molecular weight compared to kraft lignin. Both structural and thermal characteristics suggest that lignin polyols would be a good substitute for kraft lignin in the synthesis of polymeric compounds such as environmentally friendly resins or wood adhesives, as it presents higher amounts of activated free ring positions, higher molecular weight, and high thermal stability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.