Abstract
• Tamisolve® was used as a non-toxic solvent for P(VDF-HFP) membranes preparation. • The prepared porous P(VDF-HFP) membranes were fully characterized. • The membranes were tested in membrane distillation and membrane crystallization. • Membrane crystallization allowed achieving crystals with rejection greater than 99%. The replacement of the toxic solvents with non-toxic equivalents attracts a great attention in membrane preparation and application processes. The purpose of this work is to study the preparation of poly(vinylidene fluoride-hexafluoropropylene) P(VDF-HFP) flat sheet membranes by non-solvent induced phase separation (NIPS) using Tamisolve® as a non-toxic solvent, for membrane distillation (MD) and membrane crystallization (MCr) applications. The prepared porous P(VDF-HFP) membranes were fully characterized in terms of morphology, porosity, thickness, pore-size, contact angle and pure water permeability (PWP). The effect of additive(s) and polymer content were investigated. Moreover, preliminary DCMD and MCr tests were carried out and the achieved results indicate the good performance of the prepared flat sheet membranes in terms of permeate flux and salt rejection in comparison to a commercial PVDF membrane. The obtained results confirmed the ability of the eco-friendly Tamisolve® NxG to compete with the highly toxic diluents usually used in membrane fabrication by phase inversion method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.