Preparation and Characterization of Hydrophobic Porous Yttria-stabilized Zir-conia Hollow Fiber for Water Desalination

Abstract

Porous yttrium-stabilized zirconia (YSZ) hollow fibers with an outer diameter of 1.92 mm, membrane thickness of 0.21 mm were prepared by a combined technique of phase inversion and sintering. The hollow fiber possessed a sandwich structure with long-finger like voids near the inner and outer walls and a thin porous sponge-like layer in the center. The porosity and average pore size of the YSZ hollow fiber were determined to be 54% and 0.56 m, respectively. The surface of the hollow fiber was converted from hydrophilic to hydrophobic by grafting with fluoroalkylsilane (FAS). The as-prepared hydrophobic YSZ hollow fiber exhibited desired water desalination performance operating in the vacuum membrane distillation (VMD). A water flux as high as 48.3 L/(m 2 h) was attained with a salt rejection of over 99.7% by exposing the shell side of the fiber to an aqueous