Preparation and characterization of graphene‐agar and graphene oxide‐agar composites

Abstract

ABSTRACTBiodegradable counterparts of petro plastics for packaging applications are highly desired due to environmental considerations. Agar can be a potential material due to its availability and biodegradability. However, moderate mechanical strength and thermal stability, in addition to poor resistance against water, needs to be addressed before agar can be commercially implemented as packaging material. As a step toward this objective, graphene oxide (GO) and reduced GO (RGO) were incorporated in agar and were solution casted in the form of films. The tensile strength was increased by 118.4% and 69.4% at 2% GO and 2% RGO loading, respectively. Higher interfacial bonding between GO and agar compared to that of RGO and agar was attributed for the observed mechanical properties. Resistance to swelling and hydrophobicity (contact angle) of the composite were improved as well when compared to pure agar. The tensile strength and the contact angle values were however, decreased after the addition of 2% GO and 2% RGO. The morphological investigation showed that the formation of pores at higher concentration of reinforcement was the contributing factor for the decrease in tensile strength. No significant change in thermal properties was observed. The transmittance value was reduced to 0% after the incorporation of GO and RGO. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45085.