Abstract
Rigid polyurethane foams were excellent thermal insulation materials with widely used, which was highly flammable at the same time. In order to obtain safe application, flame retarded polyurethane foams were needed. In this paper, series flame retarded rigid polyurethane foams were prepared with loading different flame retardants such as ammonium polyphosphate, expandable graphite, red phosphorus, Tri (2-chloroethyl) phosphate and dimethyl methylphosphonate. The effects of flame retardants on the foaming-process and flame retardant property of the rigid polyurethane foams were investigated by otary viscometer and limiting oxygen index. The results showed that the combination of solid and liquid flame retardants was necessary to improve the flame retardant and different flame retardants played synergistic roles in rigid polyurethane foams. The limiting oxygen indexes of the foams could be up to 30wt% and 29.6% with 25wt% solid flame retardants and 10wt% liquid retardants, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.