Year-end Sale % OFF 
Abstract
Molybdenum (Mo) thin films have been deposited on soda-lime glass substrates using a DC magnetron sputtering system. Their electrical resistivity, and their morphological, structural and adhesive properties have been examined with respect to the deposition power, deposition time and substrate temperature. The electrical resistivity of the Mo films could be reduced by increasing any of the above parameters. Within the range of the investigated deposition parameters, the films showed a mono-crystalline nature with a preferred orientation along the (1 1 0) plane. The Mo films adhesion to the soda-lime glass could be improved by increasing the substrate temperature. At a deposition power of 200 W, deposition time of 20 min and substrate temperature of 450 °C, Mo thin film exhibiting mono-crystalline structure with thickness equal to 450 nm and electrical resistivity equal to 1.85 × 10 −4 Ω cm was obtained.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
