Abstract
In the present work, the preparation of several chemically activated carbons (CACs) from marine Posidonia oceanica fibrous biomass was performed using various activating agents. The chemical activation was carried out using phosphoric acid (H3PO4), potassium hydroxide (KOH), zinc chloride (ZnCl2) and hydrogen peroxide (H2O2). The effects of those impregnating agents were investigated for all produced CACs via several chemical and structural analyses.The results showed that H3PO4 seems to induce the deepest impact on the P. oceanica fibres by providing the lowest conversion yield (16.9%). Besides, the pore analysis showed that two types of porosity were developed: (i) CACs characterized by an inner structure combining significant fraction of both mesopores and micropores (i.e. CAC-H3PO4, CAC-KOH and CAC-ZnCl2) and (ii) CAC-H2O2 with a large mesoporous structure and a small fraction of microporosity. Dealing with the RAMAN and XPS analysis, it was showed that the main carbon fraction is structurally organized (i.e. graphite), especially for the CAC-ZnCl2 sample. As for the isotherm and kinetic investigation, the experimental and modelling results revealed that CAC-H3PO4 was the best performing activated carbon by removing the highest methylene blue dye amount (137mg/g) in the shortest time (1.3h to reach the half reaction point).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
