Abstract

Regenerated cellulose nanoparticles (RCNs) including both elongated fiber and spherical structures were prepared from microcrystalline cellulose (MCC) and cotton using 1-butyl-3-methylimidazolium chloride followed by high-pressure homogenization. The RCN has a two-step pyrolysis, different from raw MCC and cotton that had a one-step process. The crystalline structure of RCNs was cellulose II in contrast to the cellulose I form of the starting materials. Also, the RCNs have decreased crystallinity and crystallite size. The elongated RCNs produced from cotton and MCC had average lengths of 123 ± 34 and 112 ± 42 nm, and mean widths of 12 ± 5 and 12 ± 3 nm, respectively. The average diameter of spherical RCNs from MCC was 118 ± 32 nm. Cellulose nanocrystals and cellulose nanofibers with I and II crystalline allomorphs (designated as CNC I, CNC II, CNF I, and CNF II) were isolated from bleached wood fibers by alkaline pretreatment and acid hydrolysis. The effects of concentration, particle size, surface charge, and crystal structure on the lyophilization-induced self-assembly of cellulose particles in aqueous suspensions were studied. Within the concentration range of 0.5 to 1.0 wt %, cellulose particles self-organized into lamellar structured foam composed of aligned membrane layers with widths between 0.5 and 3 ì m. At 0.05 wt %, CNC I, CNF I, CNC II, and CNF II self-assembled into oriented ultrafine fibers with mean diameters of 0.57, 1.02, 1.50, and 1.00 ì m, respectively. Cellulose nanoparticle (CNP) reinforced Polyvinyl alcohol-borax (PB) hydrogels were prepared through a facile approach in an aqueous medium. The obtained stiff, high-water-capacity (~96%), low-density (~1.1g/cm3), translucence hydrogels exhibited birefringence textures. These free-standing, high elasticity and mouldable hydrogels also exhibited self-recovery under continuous step strain and thermo-reversibility under temperature sweep. The rheological tests and compression measurements confirmed the incorporation of well-dispersed CNPs to PB system significantly enhanced the compressive strength, viscoelasticity and stiffness of the hydrogels. Highly-crystalline CNPs not only tangled with PVA chains though numerous hydrogen bonds, but formed chemically crosslinked complexes with borax ions as well, thus acting as multifunctional crosslinking agents and nanofillers to physically and chemically bridge the 3D network hydrogels.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.