Preparation and Characterization of Cellulose Nanocrystal‐Doped Cellulose Triacetate Optical Films by Sol‐Gel Process

Abstract

AbstractA bio‐based nanocomposite optical film was obtained through a simple sol‐gel process and solution casting. The dispersion effect of cellulose nanocrystals (CNCs) gel and the optical properties, mechanical performance and thermal stability of CNC‐doped cellulose triacetate (TAC) films (TAC−X) were systematically evaluated. The results show that CNCs can be well dispersed in hydrophobic organic solvents and TAC matrices through the sol‐gel process. TAC−X film has excellent optical properties, its light transmittance is above 92 %, its haze value and birefringence are low, ranging from 0.21±0.01 % to 0.38±0.02 %, and (1.64±0.26)×10−6 to (2.49±0.50)×10−6 respectively. When doped with 2 wt % CNCs, the tensile strength and Young's modulus of the TAC‐2 film were 33.0 % and 30.1 % higher than those of the pure TAC film, separately. At the same time, the TAC−X film also maintains good thermal stability, with its glass transition temperature and maximum decomposition temperature falling between 215–216 °C and 366–368 °C respectively. The simple sol‐gel process provides a convenient and efficient way to use CNCs doping to enhance the physical and mechanical properties of TAC optical films.