Abstract
Supercritical phase inversion was used to prepare new polymeric membranes, based on cellulose acetate and Laponite®, for tissue engineering applications. These composite membranes were characterized by a porous structure (porosity around 85%) with an average pore size ranging from about 9 to 13 μm depending on the initial weight ratio cellulose acetate/Laponite. This ratio also controlled thermal and mechanical properties of these membranes: Laponite modified membrane decomposition step and increased the membrane elasticity modulus up to 4 MPa while decreasing the percentage elongation at break from 240% to 180%. Laponite also increased material cells adhesion: thanks to its homogeneous inclusion into the membranes, a remarkable cells adhesion of around 80%, six times higher than the original material, was obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
