Preparation and Characterization of Biocompatible Polymer Particles as Potential Nanocarriers for Inhalation Therapy

Abstract

Aim.Investigation of the possibility of manufacturing biocompatible polymer particles which have the required properties for pulmonary delivery via inhalation and simultaneously act as vehicles of nanotherapeutics.Methods.Nanostructures were obtained from biocompatible polysaccharides by successive oxidation and reactive coiling in the aqueous phase. The resultant nanosuspensions of PAD (polyaldehyde dextran) and DACMC (dialdehyde carbomethylcellulose) were used as precursors in spray drying production of powders at variable process conditions. The resultant dry microparticles were characterized by SEM observations, and their properties related to delivery by inhalation were determined by laser diffraction spectrometry following the dispersion in the commercial inhaler. Finally, the possibility of the reconstitution of nanosuspensions by powders rehydration was evaluated.Results.Synthesized nanoparticles had size of 120–170 nm. Microparticles after drying had size of 0.5–5 µm and different surface morphology. Aerosolized particles obtained from powder dispersion in the inhaler had the volumetric median diameter of ~2 and ~1 µm for PAD and DACMC, respectively. Hydration of powders led to restoring the nanosuspensions with the average particle size similar to the precursor.Conclusions.PAD and DACMC can be used to obtain nanostructures which, after processing, take a form suitable for effective delivery to the lungs via inhalation.