Abstract
Dense flat-sheet membranes were prepared from poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) using the casting solvents chloroform and 1,1,2-trichloroethylene. X-ray diffraction, tapping mode atomic force microscopy (TM-AFM), and contact angle studies were used to characterize the membranes. The surface energy and the solubility parameters of the PPO membranes were determined from the measured contact angles and compared with the predicted ones from the group contribution method. Swelling experiments and pervaporation separation of methanol from its mixture with ethylene glycol over the entire range of concentration, 0-100%, were conducted using these membranes. Flory-Huggins theory was used to predict the sorption selectivity. The results are discussed in terms of the solubility parameter approach and as function of the morphological characteristics of the membranes. It was found that PPO membranes prepared with chloroform exhibited better pervaporation performance than PPO membranes prepared with 1,1,2-trichloroethylene.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
