Abstract
To improve the ablation resistance of sharp leading edge (SLE) C/C composites, the ZrC nanowires reinforced ZrC coating (ZrC-ZrCnws) was prepared by two-step CVD method. The preparation of ZrC nanowires and the microstructure, bonding strength, as well as ablation resistance of the ZrC-ZrCnws coating were studied. After the severe ablation, the SLE sample with ZrC-ZrCnws coating presented an excellent ablation resistance with the mass and linear ablation rates of only 0.59 ± 0.06 mg/s and −0.92 ± 0.09 μm/s, respectively. Such good ablation resistance was attributed to the incorporation of ZrC nanowires, which can inhibit the cracking of coating and form ZrO2 rod-like structures after oxidation, supporting the oxide layer to resist flame scouring.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.