Pre-ozonation for gravity-driven membrane filtration: Effects of ozone dosage and application timing on membrane flux and water quality

Abstract

Gravity-driven membrane (GDM) filtration has been proposed as an alternative to sand filtration for drinking water treatment, but its low membrane flux and poor permeate quality hinder its widespread application. This study investigated the effect of pre-ozonation (with various dosages and application timings) on membrane flux, fouling layer characteristics, and permeate quality during GDM filtration of river water. Pre-ozonation with 3 mg/L ozone increased the mean membrane flux by 9–54%, resulting in approximately 30% increased water production and reduced dissolved organic carbon (DOC) and extracellular polymeric substance (EPS) production by 12–35% and 9–18%, respectively. The timing of pre-ozonation significantly affected the time-dependent flux behavior and morphological characteristics of the fouling layers. Pre-ozonation from the beginning of GDM filtration enhanced the initial flux because of organic fouling control but showed a gradual flux decline with time due to EPS accumulation and biologically inactive fouling layers. Pre-ozonation from the middle of GDM filtration period created heterogeneous and porous membrane fouling layers with high biological activity, showing increased membrane fluxes and improved permeate quality by removing DOC and assimilable organic carbon (AOC) via the combined action of ozone oxidation and biodegradation/sorption in the fouling layer. Overall, our results demonstrate pre-ozonation as a potential option to overcome the limitations of GDM filtration.