Preoperational assessment of solute release from waste rock at proposed mining operations

Abstract

Environmental assessments are conducted prior to mineral development at proposed mining operations. Among the objectives of these assessments is prediction of solute release from mine wastes projected to be generated by the proposed mining and associated operations. This paper provides guidance to those engaged in these assessments and, in more detail, provides insights on solid-phase characterization and application of kinetic test results for predicting solute release from waste rock. The logic guiding the process is consistent with general model construction practices and recent publications. Baseline conditions at the proposed site are determined and a detailed operational plan is developed and imposed upon the site. Block modeling of the mine geology is conducted to identify the mineral assemblages present, their masses and compositional variations. This information is used to select samples, representative of waste rock to be generated, that will be analyzed and tested to describe characteristics influencing waste rock drainage quality. The characterization results are used to select samples for laboratory dissolution testing (kinetic tests). These tests provide empirical data on dissolution of the various mineral assemblages present as waste rock. The data generated are used, in conjunction with environmental conditions, the proposed method of mine waste storage, and scientific and technical principles, to estimate solute release rates for the operational scale waste rock.Common concerns regarding waste rock are generation of acidic drainage and release of heavy metals and sulfate. Key solid phases in the assessments are those that dissolve to release acid and sulfate (iron sulfides, soluble iron sulfates, hydrated iron-sulfate minerals, minerals of the alunite–jarosite group), those that dissolve to neutralize acid (calcium and magnesium carbonates, silicate minerals), and those that release trace metals (trace metal sulfides, hydrated trace metal-sulfate minerals). Conventional mineralogic, petrographic, and geochemical analyses generally can be used to determine the quantities of these minerals present and to describe characteristics that influence their dissolution. A key solid-phase characteristic is the mineral surface area exposed for reaction, which is influenced by mode of occurrence (included, interstitial, liberated) and the extent of mineral surface coating. Short-term dissolution tests can estimate the extent of hydrated sulfate minerals present. Longer term dissolution tests are necessary to describe the dependence of drainage pH and solute release rates on solid-phase variation. The extensive data compiled from baseline pre-development definition, the operational plan, solid-phase characterization, and dissolution testing are ultimately synthesized by means of a modeling exercise requiring considerable technical and scientific expertise. The predicted rates (model outputs) are expressed as probability distributions to allow assessment of risk. This exercise must be technically defensible and transparent so that regulators can confidently assess the results and evaluate the operational plan proposed. Technical and non-technical challenges involved in implementing such programs are identified to benefit management planning for both industry and government.