Preliminary thermal-hydraulic influence of the poloidal nonuniform neutron wall loading on the CFETR HCCB blanket

Abstract

Abstract Helium Cooled Ceramic Breeder (HCCB) blanket, which has been determined as one of the blanket candidates for China Fusion Engineering Test Reactor (CFETR), is the critical component of the fusion reactor. The neutronics and thermal-hydraulic performances of the blanket are the bases of the safe operation, and they are also the initial boundary conditions for the other performance analyses. Both performances are influenced by the neutron wall loading (NWL) distribution on the blanket and the radial structural arrangement of the internal functional zones. In our previous work, the influences of the poloidal nonuniform NWL on the neutronics performances of the blanket have been investigated preliminarily. However, as the nuclear power deposition in each blanket component is the internal heat source for the thermal-hydraulic analyses, it’s essential to further investigate the influence of the poloidal nonuniform NWL on the thermal-hydraulic performances of the blanket. In this paper, taking the typical CFETR HCCB blanket module as the research object, firstly, both the neutronics and the thermal-hydraulic models are established. For investigating the influence of the poloidal nonuniform NWL on blanket performances, both models are divided into five identical parts along the poloidal direction. Afterwards, by referencing the actual poloidal NWL distribution in CFETR, we have aggregately proposed three kinds of poloidal nonuniform NWL distribution forms, including two symmetrical and one stepped NWL. On these bases, both the neutronics and the thermal-hydraulic analyses under the poloidal nonuniform NWL distributions are conducted, and the calculation results are compared with those corresponding to the uniform NWL distribution. The comparison results show that the maximum temperature of every functional zone calculated under the three nonuniform NWL distributions is generally higher than that corresponding to the uniform NWL distribution, which means that the thermal-hydraulic results calculated under the simplified uniform NWL distribution are not conservative. Under the condition of nonuniform NWL distributions, there is obvious poloidal temperature nonuniformity in every functional zone. Besides, the temperature deviations between the stepped and the uniform NWL distributions are generally larger than those between the symmetrical and the uniform ones. This paper can provide some valuable references for the detailed engineering design, analyses, and optimizations of the CFETR HCCB blanket.