Preliminary testing of a novel bilateral plating technique for treating periprosthetic fractures of the distal femur

Abstract

BackgroundCurrent stabilization methods for periprosthetic fractures of the distal femur are inadequate in achieving fracture fixation, with complication rates as high as 29%. A major contributor to poor outcomes is that these methods rely only on screw purchase in the bone to maintain fracture reduction. We designed, manufactured and evaluated a novel plating method that utilizes the femoral prosthesis to enhance stability for treatment of distal femoral periprosthetic fractures. MethodsMedial and lateral plates were designed and manufactured based on geometry of a synthetic femur and femoral prosthesis. The two plates were linked via a compression screw and a small tab on each plate that inserted into pre-existing slots on the prosthesis. Mechanical tests (500N compression or 250N anterior directed cantilever bending), were performed on synthetic femurs with simple transverse fractures (3mm gap) just superior to the distal femoral prosthesis that were stabilized using either the prototype plates or a single lateral plate. Translational movements of the fracture site during loading were measured using 3D motion tracking. FindingsWith the single lateral plate, the distal fragment experienced a resultant displacement of 0.40mm under cantilever bending and 0.61mm under compression (13% and 20% respectively of fracture gap width). With the bilateral plates, fracture gap motion was significantly reduced to 0.13mm under bending and compression (4.3% of the fracture gap). InterpretationOur results indicate that a bilateral plating method is capable of improving stabilization of periprosthetic fractures compared to the traditional lateral plating technique.