Abstract
In the present work, effect of hydrothermal temperature from 120 to 160 °C on TiO2 physicochemical properties as well as its photocatalytic activity towards biodiesel production using waste cooking oil (WCO) was investigated. TiO2was synthesized via hydrothermal method using Titanium butoxide, Ti(OBu)4 as the precursor and nitric acid, HNO3 as the peptizing agent. Next, the synthesized photocatalyst was dried at 60 °C for 24 h and later calcined at 400 °Cfor 2 h. The synthesized TiO2 was characterized using X-ray diffraction (XRD) and Burnauer- Emmet- Teller (BET) to determine their crystallinity and textural properties. Results showed that all synthesized TiO2 have a mixture of anatase and rutile phase and N2 adsorption- desorption isotherm for all catalyst possess Type IV isotherm according to IUPACclassification with hysteresis loop of type H1. Then, all the synthesized catalysts were tested for biodiesel production using esterified waste cooking oil under visible light irradiation for 1 h and 10 min. Percentage of fatty acid methyl ester (FAMEs) present in the synthesized biodiesel was determined using gas chromatography with flame ionization detector (GC-FID). The synthesized catalyst (T24_160) showed a good photocatalytic activity as the percentage of biodiesel yield was higher (3.41%) compared to the other catalyst.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.