Abstract

Lower-limb exoskeletons have been created for different healthcare needs, but no research has been done on developing a proper protocol for users to get accustomed to moving with one. The user manuals provided also do not include such instructions. A pre-test was conducted with the TWIN (IIT), which is a lower-limb exoskeleton made for persons with spinal cord injury. In the pre-test, two healthy, able-bodied graduate students indicated a need for a protocol that can better prepare able-bodied, first-time users to move with an exoskeleton. TWIN was used in this preliminary study and nine users were divided to receive a tutorial or no tutorial before walking with the exoskeleton. Due to COVID-19 regulations, the study could only be performed with healthy, young-to-middle-aged lab members that do not require walking support. The proposed protocol was evaluated with the System Usability Scale, NASA Raw Task Load Index, and two custom surveys. The members who received the tutorial found it easy to follow and helpful, but the tutorial seemed to come at a price of higher perceived mental and physical demands, which could stem from the longer testing duration and the need to constantly recall and apply the things learned from the tutorial. All results presented are preliminary, and it is recommended to include biomechanical analysis and conduct the experiment with more participants in the future. Nonetheless, this proof-of-concept study lays groundwork for future related studies and the protocol will be adjusted, applied, and validated to patients and geriatric users.

Highlights

  • Introduction1.1 State of the Art of Lower-Limb Exoskeletons

  • 1.1 State of the Art of Lower-Limb ExoskeletonsLower-limb exoskeletons have been developed for applications like spinal cord injury (SCI) and stroke rehabilitation

  • T managed to turn easier with the TWIN than no tutorial (NT)

Read more

Summary

Introduction

1.1 State of the Art of Lower-Limb Exoskeletons. Lower-limb exoskeletons have been developed for applications like spinal cord injury (SCI) and stroke rehabilitation. Weighing at 22.5 kg, the exoskeleton has three passive degrees of freedom (DOFs) at the ankle and six active DOFs to enable hip flexion/extension, hip abduction/adduction, and knee flexion/extension. The device provides partial or full assistance at the hips and knees for sit-to-stand, walking, and stair climbing. Weighing at 25 kg, the TWIN exoskeleton from Istituto Italiano di Tecnologia (IIT) is made for persons with SCI. It has four actuators for flexion/extension at the hips and knees and the device must be used with a set of crutches (Vassallo et al, 2020).

Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call