Abstract
AbstractIn this study, microwave pyrolysis of waste printed circuit boards (WPCBs) was carried out in an inert atmosphere, and the effects of pyrolysis temperature and nitrogen flow rate on the yield and composition of pyrolysis products were investigated. With the increase of pyrolysis temperature, the yield of liquid product increases gradually, and the yield of solid product decreases gradually. At 600°C, the yield of each phase tends to be stable. When the temperature continues to rise, the content of H2 and CO decreases, and the content of C6 ~ C9 in the liquid product decreases. Microwave heating promotes the pyrolysis of brominated epoxy resin, which helps to improve the recovery rate of valuable substances and reduce the environmental impact of waste treatment. This study demonstrates that the microwave pyrolysis of WPCBs in nitrogen atmosphere has great potential in the green recovery process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.