Abstract
Abstract Both fire and water protection are crucial for the safety and usability of paper-based products applied as building components. The presented study investigates the possibility of combining environmentally-friendly fire retardants with oil- and wax-based waterproofing coatings on paperboard for architectural applications. The proposed impregnation technique can be used as protection for paper-based temporary and emergency structures, or as part of the protective system for building envelopes of permanent structures. The fire retardants selected for the tests were diammonium phosphate and a mixture of borax and boric acid in a 1:1 ratio. Single-flame ignitability tests were performed on the impregnated specimens to assess the fire performance of specimens with fire impregnation, waterproofing impregnation and both. A Life Cycle Assessment analysis was performed for fire-retardant paperboard. The study has shown that the application of layered fire and waterproofing treatments on paperboard components is possible and leads to a significant reduction in flammability compared to untreated and only waterproofed specimens.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.