Abstract

The High Temperature Gas-cooled Reactor-Pebble Bed Module (HTR-PM) is a demonstration power plant designed by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University of China. In conformance with China’s nuclear safety requirements related to the development, assessment, application and quality assurance of computer software used in the safety analysis of nuclear power plants (NPPs), a phenomena identification and ranking table (PIRT) process was conducted on the subject of the HTR-PM thermal fluids and accident analysis by an expert panel sponsored by INET, on the basis of the latest HTR-PM design scheme. The PIRT objective is to identify safety-relevant phenomena that may occur during normal operation and under accident conditions, and to assess research activities pertaining to code development and assessment, such as the code validation in INET.In the PIRT process, safety-related phenomena were identified by the expert panel for the following HTR-PM scenarios: normal operation (NO), pressurized loss of forced cooling (PLOFC), depressurized loss of forced cooling (DLOFC), air ingress following DLOFC, steam/water ingress and anticipated transients without scram (ATWS). Subsequently, the relative importance of each phenomenon was evaluated according to its effect or influence on the figures of merit established by the expert panel, such as the fuel failure fraction and the maximum fuel temperature. In addition, each identified phenomenon was assigned a knowledge level rank by the expert panel, indicating the prediction capability for this phenomenon based on existing analytical tools and test data. What is more, all of the PIRT elements were well documented by a special report, including PIRT issues, objectives, descriptions of the HTR-PM plant and accident scenarios, evaluation criteria, current knowledge base, ranking scales of relative importance and knowledge level, a set of PIRTs, and expert discussions.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call