Preliminary nonlinear analysis of a scaled masonry building under shaking test for the blind prediction of the SERA AIMS project

Abstract

AbstractExperimental tests performed on scaled masonry buildings provide key information to improve the knowledge under seismic actions. Masonry buildings behavior is strongly influenced by their physical and mechanical parameters under dynamic actions. In fact, the actual structural behavior is very complex to predict due to the significant variability of the input parameters and the strong heterogeneity of masonry. Furthermore, the behavior of masonry buildings is often influenced by the interaction with adjacent building units. In this context, the SERA AIMS project aims to improve knowledge on the interaction between adjacent buildings. In order to assess the seismic capacity of masonry structures and their damage evolution, nonlinear models often require a numerical calibration of nonlinear parameters. Simplified Finite Element (FE) models, with some very simple assumptions, can be more suitable for complex problems like as the interaction between adjacent building aggregates. The low initial knowledge level in the SERA AIMS blind competition favored simple assumptions. The availability of simple models allowed to perform consecutive time histories including the cumulative effects of previous signals. In fact, the tested prototype was subjected to many replicas. The masonry structure and the crucial interfaces between the units have been modelled by means of nonlinear elements according to the reduced knowledge level at the blind prediction stage. The main goal was to estimate the key information of a masonry building under seismic action like as: triggering and the type of damage at the most stressed areas and therefore the load threshold at which evident damage is expected. Global FE model provides information on the global behaviour (in plane behaviour), while, according to the failure models typically found in masonry buildings, kinematic analyses have been performed to assess the out of plane (local) behaviour, too. The numerical results obtained by the preliminary analysis have been compared with the experimentally detected damages. The simplified approach, based on limited information without calibration, discussed in this paper, represents a useful support tool to design dynamic tests on full-scale or scaled masonry buildings, but also to assess the vulnerability of real masonry structures.