Preliminary experience with a novel facet-based lateral mass drill guide for the placement of lateral mass screws compared to freehand technique: a cadaveric study

Abstract

BACKGROUND CONTEXTLateral mass screw fixation is the standard for posterior subaxial cervical fixation. Several freehand surgical techniques for placing lateral mass screws have been described which rely on anatomical landmarks and surgeon mastery of the technique to safely place screws. The accuracy of these freehand techniques is inherently variable and can be influenced by a surgeon's level of clinical experience. A novel technique was developed that utilizes the plane of the facet joint to create lateral mass screw pilot holes parallel with the joint line to improve the safety and accuracy of lateral mass screw placement regardless of experience. PURPOSETo assess the safety and accuracy of lateral mass screw placement using a novel lateral mass drill guide instrument (LM Guide), compared to standard freehand technique. STUDY DESIGNRandomized cadaveric study utilizing multiple surgeon evaluators to compare the safety and accuracy of guided cervical lateral mass placement compared to traditional freehand techniques. MATERIALS AND METHODSLateral mass screws were placed from C3 to C7 in 20 cadaver specimens by 8 spine surgeons of varying levels of clinical experience (4 attendings, 4 fellows). Screws were placed bilaterally using standard anatomic landmarks (“freehand”) randomly allocated on one side and using the LM Guide on the other. Cadaveric specimens were imaged with high-resolution CT to assess screw placement. Zone grading for safety was conducted based on screw tip position and clinical severity of screw breach was based on proximity to surrounding neurovascular anatomy. Screws were graded as safe, at-risk, or critical, with at-risk and critical screws considered malpositioned. To assess the accuracy of screw trajectory placed using the LM Guide compared to freehand, sagittal screw angle was measured and compared to an “ideal” screw path parallel to the facet joint line. Freehand and LM Guide groups were compared using Pearson's chi-square correlation. RESULTSScrew placement using the LM guide yielded a significantly lower rate of screw malpositioning, with 7 of 91 (7.7%) compared with 18 of 99 (18.2%) screws placed in the At-Risk or Critical Zones, p<.05. Of the 91 screws inserted using the LM Guide, 84 (92.3%) were in the Safe Zone, 7 (7.7%) were At-Risk, and 0 were in Critical zones. There was no incidence of neural or transverse foramen breaches with the LM Guide. In comparison, for the 99 screws inserted freehand, 81 (81.8%) were Safe, 14 (14.1%) were At-Risk, and 4 (4.1%) were in Critical zones. The 4 Critical zone freehand screw breaches included 1 neural foramen breach, 2 transverse foramen breaches, and 1 facet breach. The LM Guide also resulted in higher accuracy of screw trajectory, as indicated by a significant reduction in sagittal screw angle compared with freehand, p<.01. Notably, in the less-experienced surgeon cohort, the LM Guide significantly reduced the sagittal screw angle and resulted in no critical screw breaches compared to 3 critical breaches with freehand technique suggesting there might be a benefit in decreasing the learning curve associated with lateral mass screw placement. CONCLUSIONSLateral mass screw placement with a novel LM Guide that uses the facet joint to control screw trajectory improved the accuracy and reproducibility of screw placement with a significant reduction in screw breach rate and sagittal screw angle compared to freehand techniques regardless of surgeon experience level. CLINICAL SIGNIFICANCEThe inherent variability of freehand lateral mass screw placement can increase the risk of clinical complications associated with screw malpositioning. The technique presented in this cadaveric study may be a viable alternative to standard freehand technique that can improve the overall safety of lateral mass screw placement.