Preliminary development of guided template of middle and upper thoracic percutaneous vertebroplasty in thoracic pedicle approach due to three dimentional soft tissue print technique

Abstract

To investigate the feasibility of a drill template for the placement of guided template of middle and upper thoracic percutaneous vertebroplasty in thoracic pedicle approach on digital design and 3D printing technology. The preoperative CT images of 20 patients with thoracic fracture were collected retrospectively. With the 3D soft tissue printing technology, the data was reconstructed by 3D imaging reconstruction software to produce 1∶1 three dimensional soft tissue model. The pedicle screw channel and the digital template were designed by the 3-matic module of Mimics15.0 software. After guide template was printed by 3D printer and three dimensional template was fixed on the model, 2.0 mm Kirschner was placed and the accuracy of a drill template was observed by CT scans, bone cement was injected through the puncture tube and verified with images. The time of nail guide design, guide template production and cost were recorded. The effectiveness of three dimensional thoracic model and digital guided template of middle and upper thoracic percutaneous vertebroplasty of thoracic fractures in thoracic pedicle approach was confirmed. Kirschner was placed and the accuracy of screw placement was confirmed with CT scanning. Template and the corresponding anatomical landmark fitted well, bone cement had showed good filling. The average printing time of upper thoracic spine model with soft tissue, the mean time of nail guide design, guide template production and cost were (719.00±3.03) min, (12.30±1.01) min, (55.50±10.30) min and RMB 3 150 yuan on average respectively. By means of individual design and 3D soft tissue printingtechnology, accurate placement of guided template of middle and upper thoracic percutaneous vertebroplasty could be realized.