Abstract
The lead-cooled fast reactor (LFR) is one of the most promising Generation-IV nuclear designs currently under development in Europe, China, and the United States. LFRs can ensure enhanced performance and minimal waste production thanks to a closed fuel cycle, but they also have some issues that need to be addressed. One of the most critical is the long-term degradation process initiated in structural materials exposed to liquid Pb. The present state of the art has shown that commercial austenitic steels, such as American Iron and Steel Institute 316L and 15-15Ti can be adopted as structural materials in Pb environments up to 480°C, beyond which they start to experience the dissolution of constituting alloying elements (Ni, Cr, and Fe) if not protected by a coating or by surface modification. In more recent years, a lot of research effort has been done in order to develop new coating technologies and new base materials for operation with liquid Pb at higher temperatures. Among the newest alloys, alumina-forming austenitic (AFA) steels have gained interest in the research community because of their promising corrosion resistance results even at temperatures of 600°C. In this framework, an experimental campaign has been run at the Research Center ENEA of Brasimone that aims to characterize the behavior of two different AFA steels (with low and high Ni content in their composition) in static Pb at 650°C and 750°C with a moderate low oxygen concentration (10−6 wt %). After exposure, the AFA steels were characterized from the point of view of the morphology and composition, and the results are presented and discussed here.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.