Abstract
Three commercial starches were evaluated in conjunction with colloidal silica and flocculant to retain precipitated calcium carbonate (PCC) filler. A unique feature of this study was the fact that the filler was pre-flocculated by a portion of starch (2kg starch/t PCC) and the rest of the starch was added after the flocculant but before the silica. The pulp used was peroxide bleached thermo-mechanical pulp (TMP). A statistical design methodology was employed and empirical process models were constructed based on the analysis of variance (ANOVA) results. The models were then employed to predict the retention and drainage. It was found that the high-charged cationic starch gave the highest retention and best drainage performance. The high-charged cationic starch S880 also resulted in stronger paper, probably because of the larger and stronger flocs produced and its higher affinity with the fiber and fines. Finally, pre-flocculation was found to provide stronger paper compared with a conventional starch/retention aid addition sequence.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.