Abstract
A model that can be used to predict the performance of Membrane Capacitive Deionization (MCDI), including current efficiency, flowrate of the product water, water recovery and energy consumption is established in this work. The model was developed using a Response Surface Model approach that considers the influence of influent conductivity, flowrate passing by the electrodes and applied current on MCDI system performance rather than relying on electrochemical principles or the description of the intrinsic properties of the carbon electrodes and ion exchange membranes. In the scenarios tested here, flowrate contributes the most towards MCDI performance. The appropriateness of using NaCl for an MCDI performance model is confirmed. The model can be applied to extensive applications with two examples detailed here including a small town potable application of 100 m3/day with influent water of 2000 μS/cm and an industrial wastewater application of 1000 m3/day with influent water of 4000 μS/cm. A costing model is developed and applied to the two scenarios with the optimised levelized cost of water (LCOW) found to be US$0.74/m3 for the small town and US$1.08/m3 to US$1.41/m3 for the industrial wastewater (product water quality dependent). By maximising the production rate, the LCOW can be minimised. The model presented here can be applied to a wide range of applications or used as a framework for efficient performance modelling of other MCDI configurations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
