Prediction the Charpy impact energy of functionally graded steels

Abstract

Article history: Received September 20, 2013 Received in Revised form October, 14, 2013 Accepted 15 December 2013 Available online 20 December 2013 Functionally Graded Steels (FGSs) are possible solutions to improve the properties of steels made by Martensite and Bainite brittle phases. These phases are usually present in the interface between the carbon ferritic steel and the stainless austenitic steel. FGSs materials are widely investigated in the recent literature but only few works have been devoted to investigate the impact energy in the case of crack arresters. To partially fill this gap, the effect of the distance between the notch tip and the position of the median phase on the Charpy impact energy is investigated in the present paper. The results show that when the notch apex is close to the median layer the impact energy reaches its maximum value due to the increment of the absorbed energy by plastic deformation ahead of the notch tip. On the other hand, when the notch apex is far from the median layer, the impact energy strongly decreases. Keeping into account the relationship between the Charpy impact energy and the plastic volume size, a new theoretical model has been developed to link the composite impact energy with the distance from the notch apex to the median phase. The results of the new model show a sound agreement with previous results taken from the literature. © 2013 Growing Science Ltd. All rights reserved.