Abstract
A time dependence of three-dimensional simulation including water phase change and heat transfer of a PEMFC model has been studied. The overshoot behavior has been observed during a change in the electrical load during operation with fixed flow rates of hydrogen and air. The simulation of 25-cm 2 active area with a serpentine flow path shows the interactions of the anode and cathode flow streams, the flow through the gas diffusion media, and the movement of water through the MEA by electroosmotic and back diffusion forces. The simulation used a commercial computational fluid dynamics (CFD) solver, STAR-CD with and add-on PEMFC module, es-pemfc. The operating conditions corresponded to 101 kPa, 70 °C cell temperature, anode and cathode dew points and stoichiometries of 78 °C and 72 °C and 1.2 and 2.0 at an initial operating voltage of 0.7 V and current density of 0.57 A cm −2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.