Abstract
Rate of penetration (ROP) is one of the most important drilling parameters for optimizing the cost of drilling hydrocarbon wells. In this study, a new empirical correlation based on an optimized artificial neural network (ANN) model was developed to predict ROP alongside horizontal drilling of carbonate reservoirs as a function of drilling parameters, such as rotation speed, torque, and weight-on-bit, combined with conventional well logs, including gamma-ray, deep resistivity, and formation bulk density. The ANN model was trained using 3000 data points collected from Well-A and optimized using the self-adaptive differential evolution (SaDE) algorithm. The optimized ANN model predicted ROP for the training dataset with an average absolute percentage error (AAPE) of 5.12% and a correlation coefficient (R) of 0.960. A new empirical correlation for ROP was developed based on the weights and biases of the optimized ANN model. The developed correlation was tested on another dataset collected from Well-A, where it predicted ROP with AAPE and R values of 5.80% and 0.951, respectively. The developed correlation was then validated using unseen data collected from Well-B, where it predicted ROP with an AAPE of 5.29% and a high R of 0.956. The ANN-based correlation outperformed all previous correlations of ROP estimation that were developed based on linear regression, including a recent model developed by Osgouei that predicted the ROP for the validation data with a high AAPE of 14.60% and a low R of 0.629.
Highlights
The total cost of drilling a hydrocarbon well is time-dependent [1]
Rig time, which is affected by many factors, such as rate of penetration (ROP), is considered the most critical parameter for determining the total cost of drilling
This study aimed to develop a new empirical correlation for ROP estimation in horizontal wells and carbonate formations as a function of RPM, T, and WOB, combined with conventional well log data including GR, deep resistivity (DR), and formation bulk density (RHOB)
Summary
The total cost of drilling a hydrocarbon well is time-dependent [1]. Rig time, which is affected by many factors, such as rate of penetration (ROP), is considered the most critical parameter for determining the total cost of drilling. Optimizing ROP has a significant impact on reducing the total cost [2]. ROP is affected by several parameters, which can be categorized into controllable and uncontrollable parameters [3]. The controllable parameters include weight-on-bit (WOB), rotation speed (RPM), pumping rate (GPM), torque (T), and standpipe pressure (SPP) [4,5]. The uncontrollable parameters include bit size and drilling fluid type, density, and rheological properties. The uncontrollable parameters affect each other, which complicates the quantification of their effect on ROP [6]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.