Prediction of the Elastic Properties of Ultra High Molecular Weight Polyethylene Reinforced Polypropylene Composites Using a Numerical Homogenisation Approach

Abstract

The elastic properties of polypropylene (PP) and ultra-high molecular weight polyethylene (UHMWPE) textile composites were predicted using finite element analysis (FEA). A three-dimensional (3D) model of composites was generated by introducing a cloth made from UHMWPE fibers into a PP matrix. Regarding the weaving type, the reinforcement was fabricated by replicating plain and twill-woven materials. Additionally, the elastic properties of the composites were compared and evaluated by varying the volume fraction of UHMWPE in the composites from 45% to 75%. The elastic modulus of the composites containing textiles prepared using the plain weaving method was greater than that of the composites containing textiles prepared using the twill weaving method. Along the axial direction, the shear modulus calculation results for the plain-woven reinforcement textiles were distinct. However, the shear moduli in both directions were similar in the twill-woven reinforcement materials. Moreover, the future development of composites should quantify the simulation by measuring the tensile strength and shear strength of real materials.