Prediction of tensile strength of friction stir welded aluminium matrix TiC p particulate reinforced composite

Abstract

The usage of particulate reinforced metal matrix composite (MMC) is steadily increasing due to its properties such as high specific strength, high specific modulus and good wear resistance. Aluminium matrix composite (AMC) plays an important role to meet the above requirements. Effective utilization of AMC is based on not only its production but also on fabrication methods. Among AMCs, those based on particulate reinforcements are particularly attractive, due to their lower production costs. Aluminium matrix titanium carbide reinforced composite (Al–TiC p) was produced in an inert atmosphere by indigenously developed Modified Stir Casting Process with bottom pouring arrangement (3–7% TiC by weight). Friction stir welding process (FSW) is employed to make weld joints. The welding parameters such as axial force, welding speed, tool rotational speed, percentage TiC addition etc., and profile of the tool were considered for analysis. In this study, an attempt is made to predict ultimate tensile strength (UTS) of the welded joints using a mathematical model. The FSW specimens without any post-weld heat treatment belonging to a different set of parameters tested, exhibited a high joint efficiency (most of them ranging from 90% to 98%) with respect to the ultimate tensile strength of the base material AA6061. It was found from the analysis of the model that the tool pin profile and the welding speed have more significant effect on tensile strength.