Prediction of Squeeze Cast Density Using Fuzzy Logic Based Approaches

Abstract

AbstractIn the present work, efforts are made to develop the input-output relationships for squeeze casting process by utilizing the fuzzy logic based approaches. Casting density in Squeeze casting is expressed as function of process parameters, such as time delay before pressurizing the metal, pressure durations, squeeze pressure, pouring temperature and die temperature. It is to be noted that, Mamdani based model and Takagi and Sugeno's model have been developed to model density in squeeze casting process. Manually constructed Mamdani based fuzzy logic controller and Takagi and Sugeno's based fuzzy logic controller have been used in approach 1 and approach 2 respectively. Training of FLC is carried with the help of five hundred input-output data set generated artificially through regression equations, obtained earlier by the same authors. The performance of the developed models was tested for both the linear and non-linear membership function distributions with the help of ten test cases. Moreover, the test data was collected by conducting the experiments and not used in training of FLCs. It is interesting to note that both approaches are capable to make accurate predictions. However, the performance of approach 2 with G bell shape membership function distribution is found to outperform approach 1 and other type of membership function distributions. The findings are useful to foundry-men, since it provides information on casting density in squeeze casting process for the different combination of process parameters without conducting any experiments.