Prediction of Mean Heat Transfer Characteristics of Multiple Impinging Jets with Steady RANS Simulation Using a Coarse Mesh

Abstract

The capability of the standard SST k-ω turbulence model for the prediction of jet impingement cooling characteristics using a coarse mesh is investigated. The discussion is based on a sensitivity study with five computational grids, differing from each other in topology and resolution. The analysis considers a hexagonal configuration of turbulent jets at the inlet Reynolds number equal to 20,000, with the distance between the nozzle and target plates equal to four nozzle diameters. The results of steady RANS simulations are validated against the time-averaged LES results and data from experiments. The mean heat transfer characteristics of turbulent impinging jets have been successfully reproduced with all tested grids, which indicates that for a rather accurate mean heat transfer prediction, it is not necessary to resolve all the small-scale flow features of impinging jets above the target plate.