Prediction of in vivo lower cervical spinal loading using musculoskeletal multi-body dynamics model during the head flexion/extension, lateral bending and axial rotation.

Abstract

Cervical spine diseases lead to a heavy economic burden to the individuals and societies. Moreover, frequent post-operative complications mean a higher risk of neck pain and revision. At present, controversy still exists for the etiology of spinal diseases and their associated complications. Knowledge of in vivo cervical spinal loading pattern is proposed to be the key to answer these questions. However, direct acquisition of in vivo cervical spinal loading remains challenging. In this study, a previously developed cervical spine musculoskeletal multi-body dynamics model was utilized for spinal loading prediction. The in vivo dynamic segmental contributions to head motion and the out-of-plane coupled motion were both taken into account. First, model validation and sensitivity analysis of different segmental contributions to head motion were performed. For model validation, the predicted intervertebral disk compressive forces were converted into the intradiskal pressures and compared with the published experimental measurements. Significant correlations were found between the predicted values and the experimental results. Thus, the reliability and capability of the cervical spine model was ensured. Meanwhile, the sensitivity analysis indicated that cervical spinal loading is sensitive to different segmental contributions to head motion. Second, the compressive, shear and facet joint forces at C3-C6 disk levels were predicted, during the head flexion/extension, lateral bending and axial rotation. Under the head flexion/extension movement, asymmetric loading patterns of the intervertebral disk were obtained. In comparison, symmetrical typed loading patterns were found for the head lateral bending and axial rotation movements. However, the shear forces were dramatically increased during the head excessive extension and lateral bending. Besides, a nonlinear correlation was seen between the facet joint force and the angular displacement. In conclusion, dynamic cervical spinal loading was both intervertebral disk angle-dependent and level-dependent. Cervical spine musculoskeletal multi-body dynamics model provides an attempt to comprehend the in vivo biomechanical surrounding of the human head-neck system.