Prediction of Impact-Induced Fibre Damage in Circular Composite Plates

Abstract

A simple analytical impact damage model for preliminary design analysis is developed on the basis of experimental findings observed from quasi-static lateral load and low velocity impact tests. The analytical model uses a non-linear approximation method (Rayleigh–Ritz) and the large deflection plate theory to predict the number of failed plies and damage area in a quasi-isotropic composite circular plate (axisymmetric problem) due to a point load at its centre. It is assumed that the deformation due to a static transverse load is similar to that occurred in a low velocity impact. It is found that the model, despite its simplicity, is in good agreement with finite element (FE) predictions and experimental data for the deflection of the composite plate and gives a good estimate of the number of failed plies due to fibre breakage. The predicted damage zone could be used with a fracture model developed by the second investigator to estimate the compression after impact strength of such laminates. This approach could save significant running time when compared to FE numerical solutions.