Abstract

Accurate modeling of the laminar-turbulent transition remains a challenge for the prediction of external heat transfer on turbine airfoils. This paper presents a numerical study for turbine heat transfer and by-pass transition under high freestream turbulence using advanced turbulence models. Reynolds-Averaged Navier-Stokes (RANS) analyses have been carried out for two transonic turbine airfoils, with inlet turbulence intensity ranging from 12% to 16%, and exit Reynolds number varying from 8×105 to 1.5×106. The RANS results are compared against the recent data from Virginia Tech, as well as the predictions from a 2-D boundary layer code — TEXSTAN. The effects of inlet turbulence length scale on the freestream turbulence decay and boundary layer transition are investigated using different models, including a Reynolds stress model. It is found that a postulation by Steelant and Dick can be used to set up plausible turbulence length scales at the inlet. It is observed that maintaining a proper decay rate of freestream turbulence inside the turbine passages is necessary to achieve reasonably good prediction of transition and heat transfer. The V2F, SST, and k-ε turbulence models have been assessed.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.