Prediction of flow stresses for a typical Nickel-Based superalloy during hot deformation based on constitutive equation

Abstract

Abstract Utilizing the Gleeble-3500 thermal simulation testing machine, a series of isothermal constant strain rate thermal compression tests were executed to study the high-temperature rheological properties of the GH4169 alloy. These tests were carried out under deformation temperatures between 900°C and 1100°C, with strain rates from 0.001 to 1 s−1, and involved a deformation of 60%. The results reveal that the peak stress of the GH4169 alloy decreases as the temperature increases, and the strain rate decreases during hot deformation. The activation energy for thermal deformation is calculated to be 806.39 kJ/mol. Through regression analysis and polynomial fitting of true stress-strain curves from thermal compression tests, an Arrhenius constitutive equation integrating strain compensation for high-temperature deformation was established. The model exhibits an average relative error of 8.86% between predicted and experimental values, indicating the model’s good accuracy in predicting the alloy’s rheological behavior during thermal deformation. By adjusting the strain rate and deformation temperature, this model can be utilized to control the stress level in the hot working process.